promotional
 
         
       
 
 
 
[ ]
 



Positive Displacement Dispensing Valves



  PDV-1000 Auger Valve
The PDV1000 auger valve has been engineered to dispense small amounts of solder paste using positive displacement. The auger valve (commonly called a screw valve) is a servo driven system controlled by the I&J Fisnar PDC2000 for rotation speed, fluid pressure and reverse drive affecting snuff-back. The PDV1000 can also be used to dispense higher viscosity materials greater than 35,000cps.
   


  VDP150 Positive Displacement Valve
The VDP150 Positive Displacement valve can volumetrically dispense material from 5,000cps to 20,000cps. The valve is adjustable from 0.005cc - to 0.015cc and is operated by a 4-way valve controller model VC-1195A to control the two internal check valves within the main body of the volumetric valve.
   


  PDC-2000 Auger Valve Controller
The PDC-2000 Auger Valve Controller is designed to be used with the PDV-1000 Valve to provide rotation speed, fluid pressure, and snuff-back capability. All PDV-1000 Auger valves require the PDC-2000 Controller to operate.
     


  VC-1195A 4-Way Valve Controller
The VC-1195A Dispensing Valve Controller is designed to provide a faster cycle for any valve that has a secondary air input line. The second air line will snap the valve closed faster than with an internal spring closing system. This will allow for a higher cycle rate and reduce the amount of material that trapped in the valve after dispensing.
   

 

 



 

 

     
 
 
© COPYRIGHT 2008. CV. KT INTERNATIONAL. ALL RIGHTS RESERVED.