promotional
 
         
       
 
 
 
[ ]
 


Lead Free Compatible Soldering Iron/Digital [UNICON-107]

Lead Free Compatible Soldering Iron/Digital [UNICON-107]
Equipped with a safety control sensor,the first in the world (patent applied for).

FEATURES
  • The POWER switch is automatically turned off to secure safety.
  • Energy saving function is provided. The heater temperature is dropped to the READY level during standby. (The temperature is auotmatically reset when the operator picks up the iron.)
  • If the operator starts working before the iron tip reaches the set temperature, the buzzer sounds.
  • Temperature control using codes is possible.
  • Leak current is minimized due by using a 24V heater.
  • Proportion control, selection of turning on and off are possible.
  • The temperature of the iron tip can be set freely from 200 to 450°C.
  • Temperature units displayed can also be changed between °C and °F.
  • The heater temperature rises very quickly.
  • Any trouble is including heater burn-out, abnormal temperature, sensor burn-out and short circuiting, and the power is automatically disconnected after one minute.
  • Sufficient countermeasures have been provided to prevent Electrostatic Discharge (E.S.D.).
  • This item has a current CE Marking approval.

     

SAFETY CONTROL TIMING CHART
Temperature warm-up property of iron tip
Only 20 seconds to 300°C!
Surprising temperature warm-up

The table shows the results of the test on the "heater temperature warm-up property" of the UNICON-107(S)/ HANDY MAX(S).
Look at the excellent "high-speed heating". It takes only some 20 seconds for the tip of the iron to warm up to the optimum temperature of 300°C after the switch is turned on. This marvelous high-speed heating property is sure to help widely improve your production efficiency and acceptance rates of your products.

Temperature warm-up data of iron tip
 
Standard Constitution
Model UNICON-107S UNICON-107M UNICON-107L

Wattage of heater imbedded

50W 70W 90W
Main Station Unit
U107-ST
Hand piece U107S-HD U107M-HD U107L-HD
*The ohter accessories: Handpiece stand, Cleaning sponge and 1 standard iron tip
*Standard iron tip: S="U300207B", M="U500207B", L="U720BC
Specification/ Station Unit
Model U107-ST
Outline dimensions 95(W)×85(H)×170(D)
Weight Approx. 2.5kg
Input power AC100V, AC115V orAC 220V*
Output voltage/heater AC24V
Temperature range 200~450?
Temperature accuracy

Unloaded Ripple amplitude ±3?

Power cord 2m
*Permissive voltage±10%,Frequency 50/60Hz
Specification/ Hand piece
Model U107S-HD U107M-HD U107L-HD
Full lenght* 215mm 225mm 255mm
Weight* 70g 90g 100g
Heater power 50W 70W 90W
Sensor K type (CA Sensor)
Tip-to-ground resistance Less than 2 Ohms
Tip-to-ground resistance Less than 2mV
Cord 1.5m

 

 

     
 
 
© COPYRIGHT 2008. CV. KT INTERNATIONAL. ALL RIGHTS RESERVED.